Presonus Eris E5 Powered Studio Monitor
Item No. : 158394
Boullard Price:
145.–
On orderThis product will be ordered as soon as possible from our suppliers.Warranty : 2 years
Click & Collect
Pick up in store
Tuesday to Saturday
The specialist's opinion
The Eris speakers are true studio monitors, offering a very precise response with solid bass and very clear highs.
Specification
With their Kevlar woofer, ultra-light silk dome tweeters, responsive Class AB amplification, and professional acoustic tuning controls, they've got it all. Among the 2 models in the range, you can easily find the Eris monitor that best suits your needs. The compact Eris E5 takes up little space and weighs less than 5 kg. Equipped with 2 amplifiers of 45W (boomer) and 35W (tweeter), it can handle a 102 dB of peak SPL for a frequency response of 64 Hz to 22 kHz. For an extended low frequency response and a little more power, the Eris E8 has 2 amplifiers of 75W (boomer) and 65W (tweeter), it can go down to 45 Hz. Like the E5, the E8 can reach 22 kHz. With its extra juice, the E8 can deliver up to 105dB SPL peak. Both Eris monitors have a front vent.
Today's music producers face a wide variety of musical genres. It is therefore essential to have controls that allow increased adaptability. The most basic control is the input gain, ie the definition of the levels for each step of the recording chain in order to obtain the clearest signal possible. The Eris range offers 3 EQ settings in the Acoustic Tuning section: Cutoff High, Mid and Low. These controls allow you to fine-tune the monitors depending on the environment or when using the E5 or E8 with a subwoofer. A 3-position switch, Acoustic Space drives a second-order shelving filter, it cuts at 800Hz (0dB, -2dB and -4dB) to compensate for the bass boost that occurs when the monitor is placed close from a wall or in a corner. This combination of controls allows you to create a linear response for precise monitoring. This allows you to simulate different listening environments, so you don't have to leave your studio to 'check' your mixes on other alternative listening systems.
Eris monitors offer protection against radio frequencies that could be induced in the signal, against overheating and a limitation of the output current (to avoid generating a short circuit on the loudspeaker terminals). In addition, a subsonic protection filters out low frequency vibrations that could interfere with the performance of the woofer. Finally, Eris power amplifiers benefit from a 'soft start' so as not to damage the speakers when powering up.
The PreSonus line of Eris monitors offer professional quality audio. They are light, compact and as beautiful as the sound they deliver. But what really sets them apart from comparably priced systems are user controls that allow you to tailor the speaker response to your needs.
Characteristics
Amplification
LF 45W
HF 35W
Peak SPL (@ 1 meter) 102 dB
Input impedance - 10 kOhms
Frequency response 53 Hz - 22 kHz - cutoff frequency: 3 kHz
Loudspeakers
boomer: 5.25 inch Kevlar
tweeter: 1 inch silk dome
Laminated vinyl cabinet with front vent
Entries
1x balanced XLR
1x balanced TRS jack
1x unbalanced RCA
Controls
MF: -6, 0, +6 dB
HF: -6, 0, +6 dB
Low cut: flat, 80Hz, 100Hz
Acoustic Space: flat, -2 dB, -4 dB
Miscellaneous
- Radio frequency protection
- output current limitation
- overheating protection
- soft start
- Subsonic filter
- Dimensions / weight 178 x 195 x 260 (mm) - 4.63 kg
Weight / weight: 1.5
Today's music producers face a wide variety of musical genres. It is therefore essential to have controls that allow increased adaptability. The most basic control is the input gain, ie the definition of the levels for each step of the recording chain in order to obtain the clearest signal possible. The Eris range offers 3 EQ settings in the Acoustic Tuning section: Cutoff High, Mid and Low. These controls allow you to fine-tune the monitors depending on the environment or when using the E5 or E8 with a subwoofer. A 3-position switch, Acoustic Space drives a second-order shelving filter, it cuts at 800Hz (0dB, -2dB and -4dB) to compensate for the bass boost that occurs when the monitor is placed close from a wall or in a corner. This combination of controls allows you to create a linear response for precise monitoring. This allows you to simulate different listening environments, so you don't have to leave your studio to 'check' your mixes on other alternative listening systems.
Eris monitors offer protection against radio frequencies that could be induced in the signal, against overheating and a limitation of the output current (to avoid generating a short circuit on the loudspeaker terminals). In addition, a subsonic protection filters out low frequency vibrations that could interfere with the performance of the woofer. Finally, Eris power amplifiers benefit from a 'soft start' so as not to damage the speakers when powering up.
The PreSonus line of Eris monitors offer professional quality audio. They are light, compact and as beautiful as the sound they deliver. But what really sets them apart from comparably priced systems are user controls that allow you to tailor the speaker response to your needs.
Characteristics
Amplification
LF 45W
HF 35W
Peak SPL (@ 1 meter) 102 dB
Input impedance - 10 kOhms
Frequency response 53 Hz - 22 kHz - cutoff frequency: 3 kHz
Loudspeakers
boomer: 5.25 inch Kevlar
tweeter: 1 inch silk dome
Laminated vinyl cabinet with front vent
Entries
1x balanced XLR
1x balanced TRS jack
1x unbalanced RCA
Controls
MF: -6, 0, +6 dB
HF: -6, 0, +6 dB
Low cut: flat, 80Hz, 100Hz
Acoustic Space: flat, -2 dB, -4 dB
Miscellaneous
- Radio frequency protection
- output current limitation
- overheating protection
- soft start
- Subsonic filter
- Dimensions / weight 178 x 195 x 260 (mm) - 4.63 kg
Weight / weight: 1.5
Discover all the products: Presonus Studio Monitors
Our specialists at your service
Studio Monitors
