Radial Bassbone OD
Item No. : 186656
Boullard Price:
449.–
Click & Collect
Pick up in store
Tuesday to Saturday
The specialist's opinion
With two fully adjustable channels, an overdrive circuit (based on a TS9 for bass) an DI, an effects loop, a dedicated instrument input with piezo and a headphone output, this preamp and the ultimate tool for the bass player nomad, the one who wants to record or do live.
You can use two instruments simultaneously or a single instrument on two channels.
These offer an adjustable HPF on 2 levels as well as the choice of three medium frequencies (1 Khz, 500 Hz, 250 Hz) to find your ideal place in the mix.
Specification
- DRIVE: level of overdrive applied to the signal
- MIX: dry-wet mix, mixes the original bass signal with the overdrive sound, the effects loop or both
- TONE: adjustment of the sonic character of the overdrive circuit
- HPF: high pass filter
- GAIN: adjustment of the individual instrument level
- LOW: EQ of low frequencies (shelving)
- HIGH: EQ of high frequencies (shelving)
- MID SETTING: semi-parametric midrange with switchable center frequency
- MID SWITCH: selects the center frequency of the mid range setting
- BLEND: mixes the two channels for instruments with a dual system of electric and acoustic microphones. When engaged, the A / B footswitch is disabled.
- PZB (INPUT-A): recessed switch, it boosts the signal and increases the impedance to 10 MOhms for instruments equipped with piezo
- DRAG (INPUT-B): adjusts the load for a magnetic pickup to produce a more natural sound
- PRE-POST: directs the balanced output before (pre) or after (post) the effects loop and overdrive
- 180 ° (LOOP): recessed switch used to reverse the polarity of the effects loop
- 180 ° (XLR): built-in switch reversing pins 2 and 3 on the balanced XLR output
- MUTE: this footswitch cuts all outputs except the tuner
- indicator leds
- INPUT: 2 x standard 6.3 mm mono jack
- OUTPUT: 1 x standard 6.3mm mono jack, 1 x balanced XLR, 1 x standard 6.3mm mono jack to tuner, 1 x 3.5mm headphone output
- 2 x standard 6.3 mm mono jacks for effects loop
- power supply (included): 15 V DC adapter (400 mA), (+) tip (-) sleeve
- dimensions (L x W x H) 203 mm x 107 mm x 49 mm
- weight 1.13 kg
- MIX: dry-wet mix, mixes the original bass signal with the overdrive sound, the effects loop or both
- TONE: adjustment of the sonic character of the overdrive circuit
- HPF: high pass filter
- GAIN: adjustment of the individual instrument level
- LOW: EQ of low frequencies (shelving)
- HIGH: EQ of high frequencies (shelving)
- MID SETTING: semi-parametric midrange with switchable center frequency
- MID SWITCH: selects the center frequency of the mid range setting
- BLEND: mixes the two channels for instruments with a dual system of electric and acoustic microphones. When engaged, the A / B footswitch is disabled.
- PZB (INPUT-A): recessed switch, it boosts the signal and increases the impedance to 10 MOhms for instruments equipped with piezo
- DRAG (INPUT-B): adjusts the load for a magnetic pickup to produce a more natural sound
- PRE-POST: directs the balanced output before (pre) or after (post) the effects loop and overdrive
- 180 ° (LOOP): recessed switch used to reverse the polarity of the effects loop
- 180 ° (XLR): built-in switch reversing pins 2 and 3 on the balanced XLR output
- MUTE: this footswitch cuts all outputs except the tuner
- indicator leds
- INPUT: 2 x standard 6.3 mm mono jack
- OUTPUT: 1 x standard 6.3mm mono jack, 1 x balanced XLR, 1 x standard 6.3mm mono jack to tuner, 1 x 3.5mm headphone output
- 2 x standard 6.3 mm mono jacks for effects loop
- power supply (included): 15 V DC adapter (400 mA), (+) tip (-) sleeve
- dimensions (L x W x H) 203 mm x 107 mm x 49 mm
- weight 1.13 kg
Our specialists at your service
Basses
